Roof Panel Machine For Plastic Corrugated Roof Tile Forming Machine
PVC plastic steel tile introduction: PVC plastic steel tile is a kind of acid and alkali resistance to corrosion, with super weather resistance of the new plate, it is also known as PVC anti-corrosion tile, PVC tile, corrugated tile, plastic tile.PVC tile using high-quality PVC resin powder as the main material, adding a certain plasticizing modified materials, uv absorbent, antioxidants, etc., using imported extrusion production equipment high temperature co-extrusion synthesis.
It is widely used in the national construction projects because of its convenient installation, moderate price and good anti-corrosion performance. Compared with the color steel plate in the past, it has the following advantages: superior anti-corrosion performance, affordable, rain-free noise, anti-ultraviolet, anti-oxidation, longer service life and so on.
PVC plastic steel tile model: 840, 920, 850, 940, 1050.Its thickness is divided into: 1.5mm, 2.0mm, 2.5mm, 3.0mm
PVC plastic steel watt point:
1. Super corrosion resistance, direct contact with acid and alkali does not corrode
2. High tensile and low-temperature impact strength
3. Sound insulation, heat insulation and heat preservation
4. Good anti-corrosion performance, long-term exposure to acid, alkali and salt environment will not affect the product performance
5. Light weight, environmental protection, convenient installation, just use the saddle buckle to fix the installation
Class B1 flame retardant, self-extinguishing from fire
PVC plastic steel tile applicable scope:
All kinds of roof boards, wall panels, nonferrous metal smelting workshops, coal mines, dyeing and printing plants, paper mills, pickling plants, parking lots, awnings, electroplating plants, chemical plants, sewage treatment plants, roofing of coastal buildings, and warehouses of ports.
Main machine line :
| No. | Machine | Qty. | Remarks |
| 1 | Screw loader for SJZ 80/156 extruder | 1 | |
| 2 | SJZ 80/156 conical twin-screw extruder | 1 | For bottom PVC layer |
| 3 | Vacuum loader for SJ50 extruder | 1 | |
| 4 | drying hopper for SJ50 extruder | 1 | |
| 5 | SJ50/30 single screw extruder(ASA) | 1 | For surface ASA layer |
| 6 | 1300mm Mould unit | 1 | |
| 7 | Distributor | 1 |
| 8 | 1050mm Calibration mould with trimming device and haul off unit | 1 | For product in 1050mm width |
| 9 | Cutter | 1 |
| 10 | Stacker | 1 |
