Concrete Foundation Construction Machinery , Plastic Formwork Template Machine Width 9-20mm

wholesale plastic formwork/template in concrete foundation construction machinery

1. The reusable time can reach more than 60 times, long service life.
2. Waste products can be recycled and reprocessed, making full use of waste materials. This property can greatly reduce the project cost compared with wooden formwork and bamboo formwork.
3. Environmental protection and energy saving, no pollution. No any poisonous or harmful gas.
4. Demould easily. No need brushing release agent, only tapping, the construction formwork will fall off.Shorten working hours and speed up the construction schedule efficiently.
5. Easy to process. Sawing, drilling and nailing are all available. Formworks can be combinedvertically and horizontally optionally.
6. Easy to remove. Removing is convenient, quick and safe, and the supporting is also easy to operate, advantageous to the organization construction, effectively improving the construction schedule.

Features :

1. The reusable time for pp hollow sheet making machine can reach more than 60 times, long service life.
2. Waste products can be recycled and reprocessed, making full use of waste materials. This property can greatly reduce the project cost compared with wooden formwork and bamboo formwork.
3. Environmental protection and energy saving, no pollution. No any poisonous or harmful gas.
4. Demould easily. No need brushing release agent, only tapping, the plywood formwork price will fall off. Shorten working hours and speed up the construction schedule efficiently.
5. Easy to process. Sawing, drilling and nailing are all available. pp hollow sheet making machine can be combined vertically and horizontally optionally.


Features of plastic construction formwork:

Advantage:

General Operation And Notes Of Instrument For formwork board system :

• Method of use as well as wooden formwork, pvc bridge formwork reinforcement direction with batten direction placed in cross shaped.
• No need to smear the mold release agent before using board formwork.
• When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keels hould be 10 ~ 20 cm. ACEMIEN formwork board system don't need releasing agent.
• The seam-line between pvc bridge formwork should be taped.
• The length of nail should not be too long, generally about 30 ~ 35 mm.
• The strength to drive nailsshould be moderate.
• When removing the board formwork, please start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.
• The formwork board system accesses to be mixed used with wood veneer, bamboo veneer and other material plate