Jiangsu Acemien Machinery Co., Ltd.
Jiangsu Acemien Machinery Co., Ltd. Focus on quality, sincerity service, sincere cooperation, mutual development
Add to Cart
Plastic Pet Bottle recycling machine plastic recycling plant washing line pet bottle production line
Work flow of PET bottle plastic recycling machine
1 Label remover
Remove the label from bottles
2 Metal detector
This equipment is optional
3 Crusher
Crush with water, and this machine can cut the PET bottle into tiny flakes.
4 Hot washer
Hot washer is the most important step of the recycling line, which can remove the contamination such as grease,oil, glue etc.
5 Screw feeder
Screw feeder is mainly used for conveying the material.
7 High speed Friction washer
High speed friction washer is a highly efficient machine for cleaning PET flakes.
8 Washing tank
Washing tank separates materials based on the different density.
9 Dewatering machine
The first stage of drying process, dewatering machine can lower the PET flake's moisture to roughly 20%.
10 Pipeline drying system
Pipeline drying uses hot air to further dry the flakes which can reduce moisture level to below 1%.
11 silo A large storage tank for clean,dry PET flakes.
Basic specification of plastic pet bottle recycling machine/plastic recycling plant/pet bottle washing line
| Product capacity | 300kg/h | 500kg/h | 1000kg/h | 1500kg/h |
| Workshop(L*W*H) | 40m*7.5m*6m | 42m*10m*6m | 70m*12m*6m | 75m*15m*6m |
| Needed worker | 3-4 persons | 5-6persons | 7-8persons | 10-12persons |
| Water supply (recycle use) | 2-3ton/h | 3-5ton/h | 7-10ton/h | 10-15ton/h |
|
Final product | Moisture: max 3% Bulk density: 0.3G/CM3 Particle size: 10-18mm Metal content: max.20ppm Floatable contamination: less than 200ppm Total impurity: 100-320ppm | |||
common configuration of pet bottle plastic recycling machine/plastic washing machine/waste plastic bottle recycling plant
| No. | Equipment Name | Quantity | Comments |
| 1 | Belt conveyor | 1 set | |
| 2 | Bag opener | 1 set | Optional |
| 3 | Belt conveyor | 1 set | |
| 4 | Trommel | 1 set | Optional |
| 5 | Belt conveyor | 1 set | |
| 6 | Manual sorting conveyor | 1 set | Optional |
| 7 | Belt conveyor | 1 set | |
| 8 | Crusher | 1-2 sets | |
| 9 | Screw conveyor | 1 set | |
| 10 | Washing tank | 1 set | |
| 11 | Screw conveyor | 1 set | |
| 12 | Cooking boiler or Horizontal Hot washer | 1-2 sets | |
| 13 | Screw conveyor | 1 set | |
| 14 | High-speed washer | 1 set | |
| 15 | Washing tank | 1 set | |
| 16 | Screw conveyor | 1 set | |
| 17 | Horizontal Dewatering Machine | 1 set | |
| 18 | Cyclone separator | 1 set | |
| 19 | Drying system | 1 set | |
| 20 | Label separator | 1-2 sets | We can equipped with two label separators in the whole line, one at the beginning, another at the end |
| 21 | Final product silo | 1 set | |
| 22 | Control System | 1 set |
